Baldwin Soho AC Z-Wave Deadbolt Bedienungsanleitung PDF herunterladen (Seite 4)

a. Making sure wires are clear of pinching and wire harness is routed as

shown, place the interior assembly on door, aligning torque blade inside

the turnpiece shaft.

5. Continued.......

6. Install Interior Assembly.

Note: Turnpiece may be difcult to turn until step 8 “Automatic - Bolt

Direction Determination” is completed.

Route wires down - avoiding any

excess bulge at curve, which could

interfere with battery pack installation.

b. Once ush on door, insert and tighten small screws to secure assembly onto

the mounting plate.

Note: To aid insertion of screws, approach the screw holes with the screw loaded

onto the screwdriver.

c. Once aligned, push the connector in rmly to connect.

b. For easier orientation, view the alignment of connection from the top of

the interior assembly.

Wire Harness

Torque Blade

Small

Screws

Turnpiece

Shaft

1 2 3 4 5 6 7 8 9 ... 26 27

Keine Kommentare

Baldwin Soho AC Z-Wave Deadbolt Bedienungsanleitung Seite 4